Milling head can be pivoted to the left and right by 90° (with degree graduation). Simple pre-selection of rotational speed by shifting the Poly V-belt. Switch for clockwise and counterclockwise rotation. Sleeve feed (30mm) via lever with scale ring (1 graduation = 1mm). Tool holder using multiple range standard ER 20 type collets (DIN 6499-B): One each of 6 - 8 - 10 and 12mm are included (detailed description see below). Extension height adjustment using hand wheel with scale ring (1 rev. = 2mm). Solid, plane-milled steel compound table with three continuous MICROMOT standard T-slots (12 x 6 x 5mm).
230V. 400W. 50/60Hz. Spindle speeds 180 - 350 - 550 - 800 - 1,300 - 2,500rpm. Throat (to spindle centre) 125mm. Sleeve stroke 30mm. Column 120 x 100 x 420mm. Table 400 x 125mm. Traverse range vertical (z-axis) 220mm, transverse (x-axis) 310mm, depth (y-axis) 100mm. Total height max. 780mm. Weight approx. 47kg.
NO 24 320
The miller FF 500 is also available as "Ready for CNC" version (NO 24 344): With recirculating ball spindles and powerful step motors on all 3 axes, and also as full CNC version (NO 24 340) with control unit and user-friendly WINDOWS®-compatible software.
Drive: powerful, quiet condenser motor.
Poly-V belt drive for 6 spindle speeds between 180 and 2,500rpm.
During milling operation the spindle sleeve may be clamped with a t-screw.
Solid column with dovetail guides.
Clamping jaws, miller and work pieces are not included in the delivery.
With large multi-function display, 3 glass rulers (with one sensor each) and fastening elements.
Reasonable for repetitive machining: A second start point in addition to the zero point can be set anywhere. Most important computing functions:
- Calculation and indication of a centre position
- Basic arithmetic operations
- Positioning of drill holes on any straight lines and circular paths
- Milling of crooked planes
- Milling of radii in different planes
Digital display 265 x 182 x 48mm for 110 - 230V. 50/60Hz. Glass rulers for travel distances: vertical (z-axis) 220mm, transverse (x-axis) 300mm, depth (y-axis) 100mm. With a 200cm metal-sheated plug connecting line to the display.
See photo for full contents (click to enlarge).
NO 24 323
The standard milling head is exchanged for the adapter in just a few steps. Our 20mm collar enables to fasten all appliances of the MICROMOT 50 series, the MICROMOT precision drill/grinder FBS 240/E and the MICROMOT professional drill/grinder IBS/E. Especially for applications that require high speeds for small milling cutters (e.g. milling electronic boards), but also for micro drilling. Complete with fastening screws.
The professional drill/grinder depicted here is not included.
NO 24 346
Splash guard and chip collecting tray for PROXXON milling machines
Made of 1.5mm thick sheet steel, powder-coated. Secure stand due to drill holes for fastening to a work surface (the use of steel sleeves keeps the tray tightly sealed). L 700mm, W 420mm, H 40mm.
Suitable for FF 230, FF 400, FF 500, FF 500/CNC and FF 500 - ready for CNC as well as for mill/drill unit BFB 2000 and compound table KT 150.
Note: The milling machine depicted here is not included.
NO 24 322
Fine feed for accurate adjustments
Quick and easy to install. The clutch system enables feed via either the drill handle or the handwheel. The handwheel has 0.025 graduations and may be set to zero. 1 division = 0.05mm.
NO 24 254
Universal dividing table UT 400
For accurate machining of circular work pieces. The table may be fixed horizontally or vertically. Worm drive for division through 360° allowing for almost all possible divisions below 100. Supplied with 4 index plates: 27/42, 33/40, 34/39 and 36/38. Used to manufacture sprockets, gearboxes and drives, ratchets, cams, etc. (the faceplate is not included). The taper is identical to the main spindle of the lathe. With matching nuts and screws for fixation in MICROMOT standard T-slots (12 x 6 x 5mm). Supplied in a wooden box with sliding lid.
NO 24 421
Multiple range standard type ER 20 collets (DIN 6499-B) (not depicted)
For the mill/drill PF 400 (from production no. 401-10910) and MICRO miller FF 500 (from production no. 5648). High concentricity and repeat accuracy. May be reduced to 0.5mm under their nominal diameter (intermediate sizes not required). D = 21mm, L = 31.5mm. One each of 2.4 - 3 - 3.2 - 4 and 5mm are included. Supplied in wooden box with sliding lid.
NO 24 253
Step clamp set of steel.
2 step blocks and clamps each.
With matching slot nuts and fastening screws for T-slots as per MICROMOT standard (12 x 6 x 5mm). In wooden box with sliding lid.
NO 24 256 For work pieces up to 20mm thickness
NO 24 257 For work pieces up to 35mm thickness
Precision vice PM 60
Perfectly rectangular. To be placed sideways and on the end face. With matching nuts and screws for fixation in MICROMOT standard T-slots (12 x 6 x 5mm). Supplied in wooden box with sliding lid. Jaw width 60mm. Clamping capacity 42mm. Total length 100mm.
NO 24 255
Used to clamp various work pieces. Made from hardened steel, precision ground in pairs. Four different depths of prism incisions V, all at 90°. Size 50 x 30 x 30mm. The solid clamp and knurled knob ensure superb securing of the workpiece. Supplied in a wooden box with sliding lid.
NO 24 2622 pieces
Edge finder set
Used for fast and accurate location of starting point of work pieces with respect to the machine spindle on milling machines. Size 6 x 6 x 50mm and 6 x 5 x 75mm. Comes in wooden box with sliding lid.
NO 24 434
14-piece parallel supports set
For adjusting work on drilling machines, lathes and milling machines. Made of high-alloy, hardened steel (58 - 62 HRC). Parallel accuracy 0.002mm. 2 each of 8 x 10, 15, 20, 25, 30, 35 and 40mm. Length 100mm. Packed in a wooden box.
NO 24 266